Onsite Training
|
Browser Enabled: Windows Explorer 4.0 or higher, Netscape 4.7 or higher 
The intent is to provide the learner with a sound understanding of the standards for inspecting assembled SMT & through-hole components. Upon completion you will have knowledge about inspection standards for alignment, solder connections, and boards. You will also learn about process control and audits, ESD, and much more.
SMT & Through-Hole Workmanship Standards starts with understanding the terminology. It presents information about each of the most common types of terminals and how leads are to be attached, followed by information about the forming and insertion for leads into a board, then after solder what are acceptable solder connections. If jumpers are required the information presents how they are to be routed and solder attached. 
Target Audience The target audience is those who require a sound understanding of the standards for insertion and solder connections. This pertains to all personnel who handle or come in contact with electronic assemblies.
Course Prerequisites There is no prerequisite for this course. Book/Online Course Outline - SMT & Through-Hole Workmanship Standards There are eight chapters. Standards and ESD (Electro-Static-Discharge) Key areas presented set up an understanding about reading documents, which docuements are essential, and why ESD must be kept in check.
Assemblies may require the use of assorted terminal types, including:
The preparation of leads, the proper insertion into the boards, and how to mount assorted through-hole parts are presented.
Soldered connection for both SMT and through-hole must comply with certain requirements to be acceptable.
This module covers the issues involved in soldering and inspecting SMT components, including:
Discrete wiring refers to wires wrapped on a post (non-solder), or added as jumper wires and then soldered.
Coatings are used to protect surfaces from a variety of factors such as moisture and abrasion.
Process control is vital to success in manufacturing.
 |
| Copyright © 2004, SMT Plus Inc. |
